Use Instructions

C
HARGING THE
B
ATTERY
We recommend charging the battery to a full 100% prior to use. The battery takes about 3 hours
to charge fully when the battery is empty. Once fully charged, the battery will last for
approximately 5-
7 days depending on frequency of use.
To charge the device - plug
the USB
Plug the USB end of the charging cable into a USB adapter or power source.
Attach the charging clip to the back of
Confirm that the wristband is charging by looking at the LED light on the button of the device.
This light will alternate between red and purple flashes when the wristband is charging. The light
w
ill turn solid green when the wristband is fully charged.
To check the percentage of battery charge remaining, click the watch face button to scroll
through
the wristband options (
until y
ou get to the percentage of battery remaining, indicated by the icons below:
D
OWNLOAD
L
IVE
M
ETRIC
A
PP
1.
Go to your app store (Google Play or Apple
2. Download
the LiveMetric App.
3. Once installed Press
Open.
4.
The app will then request permission to access
For best results, we recommend setting your location permissions to “Always Allow” and
the background permissions to “Allow.”
5.
Authenticate your device. You will receive a four
code on the Code Confirmation screen on the app, then click “Next.”
6.
Watch the device tutorial to learn about the features of your wristband.
7.
Once you have watched the tutorial, click “Continue.”
Note:
If you do not allow the app to run in the backgrou
take automatic blood pressure measurements throughout the day. Please, allow the app to run in
the background for optimal performance.
SETUP THE LIVEMETRIC APP
1.
Launch the LiveMetric App and read
Page 11 of 28
We recommend charging the battery to a full 100% prior to use. The battery takes about 3 hours
to charge fully when the battery is empty. Once fully charged, the battery will last for
7 days depending on frequency of use.
the USB
-
C end of the charging cable into the charging clip.
Plug the USB end of the charging cable into a USB adapter or power source.
Attach the charging clip to the back of
the watch face by pinching the sides of the charging clip.
Confirm that the wristband is charging by looking at the LED light on the button of the device.
This light will alternate between red and purple flashes when the wristband is charging. The light
ill turn solid green when the wristband is fully charged.
To check the percentage of battery charge remaining, click the watch face button to scroll
the wristband options (
e.g
. time, last blood pressure measurement, last heart rate, etc.)
ou get to the percentage of battery remaining, indicated by the icons below:
Go to your app store (Google Play or Apple
Store)
the LiveMetric App.
Open.
The app will then request permission to access your location and to run in the background.
For best results, we recommend setting your location permissions to “Always Allow” and
the background permissions to “Allow.”
Authenticate your device. You will receive a four
-
digit code on your wristband. Enter
code on the Code Confirmation screen on the app, then click “Next.”
Watch the device tutorial to learn about the features of your wristband.
Once you have watched the tutorial, click “Continue.”
If you do not allow the app to run in the background, then the wristband may not be able to
take automatic blood pressure measurements throughout the day. Please, allow the app to run in
the background for optimal performance.
Launch the LiveMetric App and read
Terms of Agreement
on the screen.
We recommend charging the battery to a full 100% prior to use. The battery takes about 3 hours
to charge fully when the battery is empty. Once fully charged, the battery will last for
C end of the charging cable into the charging clip.
Plug the USB end of the charging cable into a USB adapter or power source.
the watch face by pinching the sides of the charging clip.
Confirm that the wristband is charging by looking at the LED light on the button of the device.
This light will alternate between red and purple flashes when the wristband is charging. The light
To check the percentage of battery charge remaining, click the watch face button to scroll
. time, last blood pressure measurement, last heart rate, etc.)
ou get to the percentage of battery remaining, indicated by the icons below:
your location and to run in the background.
For best results, we recommend setting your location permissions to “Always Allow” and
digit code on your wristband. Enter
this
code on the Code Confirmation screen on the app, then click “Next.”
Watch the device tutorial to learn about the features of your wristband.
nd, then the wristband may not be able to
take automatic blood pressure measurements throughout the day. Please, allow the app to run in
on the screen.