Use Instructions

Page 13 of 28
data correctly.
If you change the smart device that was paired with your device, delete the pairing information
from your old smart device to avoid communication issues.
P
LACINGTHE
W
AISTBAND
Blood pressure can differ between the right and left wrists,LiveMetric recommends always using
the same wrist when measuring blood pressure. Consult with your physician to determine which
wrist you should use for your measurements.
Determine the correct position of the deviceon your wrist by running your forefinger and middle
finger down your thumb to your wrist. You should feel your pulse. Place the wristband sensors
onto the pulsing artery, making sure the band is as close as possible to the bottom of your palm.
Tighten your wristband so that it is snugly-fit – not too tight and not too loose. Your wristband
should not move or slide from its position.
Select right or left to indicatewhich wrist you placed the band on pairing page and press next.
The app will also give you feedback about how well-placed the wristband is. You may need to
make adjustments to the placement both during set-up and periodically.
Select which arm your wristband is placed on, left or right. Then, click “Continue.”
On the Placement screen, you will see four signals, one from each of the wristband sensors.
Good, high quality signals appear green and poor, low quality signals will be red. For good
wristband placement, ensure that at least two of the signals are good (i.e. green).
Watch the Measurement tutorial to learn how to take blood pressure measurements with your
wristband. Once you have watched the tutorial video, click “Continue.”
Note:If your device is not connected to your selectedsmartphone when you take the
measurements, the measurements taken in the last 72 hours will be saved locally and will be
transferred to the smartphone once connected.
T
AKING YOUR
F
IRST
M
EASUREMENT
1. On the Measurement screen, press “Start” on the blue circle to begin taking a
measurement.
2. The app will begin measuring your blood pressure. You will see your pulse wave
displayed at the bottom of the screen during measurements. For best results, be silent
and still during the measurement.
3. Once the measurement has been completed, the app will display your systolic and