Use Instructions

Page 20 of 28
correct lines and follow the instructions on
screen
22. The LED has stopped blinking Wristband Click “Cancel” and start again
23. What is ABPM Placement
Screen
ABPM is a mode that allows you to
monitor a patient, automatically, in a
clinical setting, for a predefined period
of time. In this mode you can
configure the monitoring parameters;
please refer to troubleshooting in
ABPM Setting
24. What is Single Mode Placement
Screen
Single Mode allows you to monitor the
patient’s waveform line derived from
the active sensor. Periodically you can
update the BP and HR values
25. I don't have enough
measurements
ABPM Setting
Screen
Please note that if 1 hour is chosen as
the total time, it is best to select a
frequency of 10 /15/20 minutes in
order to get a significant number of
measurements
26. What is timeout? ABPM Setting
Screen
How long the wristband should
attempt to get a successful
measurement in each session of
measuring, during the monitoring
process
27. No value appears;
I get "- -"
ABPM
Measurement
Screen
Please consider repositioning the
wristband
28. No value appears;
I get "- -"
ABPM
Measurement
Screen
Please check that the patient is not
moving while the LED is blinking
blue-green
29. No value appears; ABPM Make sure the patient has rested before