Use and Care Manual

1. On/Off: Follow Initial Setup instructions before powering the fan on. Press
ON/OFF to power on. The fan will switch from Medium to Low Speed after a few
seconds. Press ON/OFF again to power off. FIGURE 3.
2. Rotate: To turn rotation on or off, press the ROTATE button. When rotation is
turned off, fan will pause in the exact position until the ROTATE button is pressed
again. FIGURE 3.
3. Timer: To set a timer, press the TIMER button. A light
will turn on next to the selected time. Continue
pressing the TIMER button until the correct amount of
time is selected. Choose from 1, 2, 4 or 8 hour intervals.
Fan with automatically shut off when time runs out.
FIGURE 3.
4. Mode: To change the mode, press the MODE button.
A light will turn on next to the selected mode.
Continue pressing the button until the desired mode is
selected. Choose from Normal, Natural and Sleep
Mode. FIGURE 3.
If you don’t like the alternating wind speeds in Sleep
Mode, set the fan to Normal Mode and set timer.
5. Speed: To change the fan speed, press the SPEED
button. A light will turn on next to the selected speed.
Continue pressing the button until the desired speed is
selected. Choose from Low, Medium and Turbo.
FIGURE 3.
Figure 3
On/O
Rotate
Timer
Mode
Speed
Rotate
1h 2h 4h 8h
Low Med Turbo
Operating Your Fan
Fan Operation
Operating the Fan:
4
Normal
Mode
Natural
Mode
Sleep
Mode
Wind speed will
be constant.
Wind speed will
irregularly
switch between
Low, Medium &
High wind
speeds.
Wind speed will
begin strong
and gradually
reduce the
intensity.