Installation Guide

INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS FOR
FOR
FOR
FOR
1076P,1075P,1074P,1073P
1076P,1075P,1074P,1073P
1076P,1075P,1074P,1073P
1076P,1075P,1074P,1073P AND
AND
AND
AND 1105A,1104A,1103A
1105A,1104A,1103A
1105A,1104A,1103A
1105A,1104A,1103A
For
For
For
For Wall
Wall
Wall
Wall Mount
Mount
Mount
Mount Fixture
Fixture
Fixture
Fixture
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
MOUNTING
MOUNTING
MOUNTING
MOUNTING THE
THE
THE
THE FIXTURE
FIXTURE
FIXTURE
FIXTURE
Installation (see fig.1)
1.Disconnect power at main electrical panel before installation.
2. Mount the back plate to the wall with the plastic anchors(A) ,
the wood screw (D) and the two box screw (E). The side of the
back plate marked “ GND ” must face out.
3 .Guide fixture wires through hole in center of back plate.
4.Follow wiring instructions carefully (see fig.2)
5. Place the fixture body (F) over the back plate so that the back
plate studs protrude through the cover plate holes and screw ball
nuts ( J ) onto the long screws (C) .
6 . Raise the glass shade( H ) to bottom of the lamp socket ( G ) ，
then lock it securely with screws (I)
until su n g
.
7.Install the light bulbs in accordance with the fixture ’ s
specifications. DO
DO
DO
DO NOT
NOT
NOT
NOT EXCEED
EXCEED
EXCEED
EXCEED THE
THE
THE
THE MAXIMUM
MAXIMUM
MAXIMUM
MAXIMUM
WATTAGE
WATTAGE
WATTAGE
WATTAGE RATING!
RATING!
RATING!
RATING!
Wiring (see fig.2)
1.Connect the electrical wires as follows. Connect the
Black wire from the fixture to the black house (hot)
Wire. Connect the white wire from the fixture to the
white (neutral) house wire. Make sure all wire nuts are
secured. You may wrap the connections with electrical
tape. If your outlet box has a ground wire (green or bare
copper) connect fixture ’ s ground wire to it. Otherwise
attach the bare copper fixture wire to the green ground
screw on the circular str a p.
2.Tuck the wire connections neatly into the wall junction
box.
F ig.1
E
1105A
1104A
1103A
1102A
Fig. 2
White or
HOUSE
Black
WIRES
(Hot)
Smooth
FIXTURE
WIRES
Black or
Ribbed
WIRES
FIXTURE
Bare Copper(Ground)
FIXTURE
WIRES
Copper
(Ground)
HOUSE
(Neutral)
WIRES
White
Bare
Green or
WIRES
HOUSE
Listed
U
L
R