Manualshelf

Installation Guide

ManualsBrandsLivex Lighting ManualsCeiling LightsGreenwich 13-in Brushed Nickel Industrial Incandescent Flush Mount Light
1
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
20754
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old fixture and
all hardware from Junction Box.
2. Carefully unpack your new fixture and lay out all the parts on a clear
area. Take care not to lose any small parts necessary for installation.
3. By measuring the both end holes distance of the mounting plate, drill
holes in the ceiling, then loaded plastic anchors. Attach the
mounting plate to the Junction Box with the two Junction Box
Screws and four wood screws as shown. The side of the mounting
plate marked "GND" must face out. The junction box is not
included.
4. While holding the fixture body towards the ceiling, connect the
electrical wires as Shown in Fig.2, making sure that all wire nuts are
secured. You may have to wrap the connections with electrical tape.
If your outlet has a ground wire (green or bare copper), connect the
fixture ground wire to it. Otherwise connect fixture’s ground wire
directly to the Mounting strap with the green screw provided. After
wires are connected, tuck them carefully inside the Junction Box.
5. Raise the fixture body(A) onto the junction box, aligning screws on
mounting plate with mounting holes in fixture body(A) and lock it
securely with the ball nuts (B).
6. Raise the glass(C) insert to the lamp holder, by turn it clockwise until
tight.
7. Install the light bulbs(Not included) in accordance with the fixture
specifications. NOTE: DO NOT EXCEED THE SPECIFIED
WATTAGE!
Your installation is now complete. Return power to the junction
box and test the fixture.
B
o
x
s
c
r
e
w
F
i
xt
u
r
e
w
i
r
e
M
o
u
n
t
i
n
g
G
r
o
u
n
d
W
i
r
e
W
o
o
d
s
cr
e
w
P
l
a
s
t
i
c
A
n
c
h
o
r
s
S
c
r
e
w
F
i
xt
u
r
e
J
u
n
c
t
i
o
n
B
o
x
(
N
o
t
i
n
c
l
u
d
e
d
)
G
r
o
u
n
d
W
i
r
e
S
u
p
p
l
y
A
B
C
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black(Hot)
FIXTURE
WIRES
White or
Ribbed
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green or Bare
Copper(Ground)
`
Thank you for purchasing a LIVEX product.
Need assistance with parts or assembly? Please call customer service at: 800-761-8056
Or visit us on-line at: WWW.LIVEXLIGHTING.COM
©COPYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,INC. DOC20181120754
FIG.2
FIG.1

Summary of content (1 pages)