Installation & Assembly

ManualsBrandsLivex Lighting ManualsLight Bulbs & HardwareDecorative Chain Break

ASSEMBLING & INSTALLATION INSTRUCTIONS FOR PRODUCT# 5724 5725 5726

For mini Pendant Fixture

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .

ASSEMBLING THE FIXTURE (Fig.1)

1. Shut off the power at the circuit breaker box. Remove old fixture and

all hardware from Junction Box.

2. Carefully unpack your new fixture and lay out all the parts on a clear

area. Take care not to lose any small parts necessary for installation.

3. Thread pipe (D) to the swivel bottom of canopy (B), thread tube (E)

and (F) onto nipple in order. Then thread pipe them onto nipple with

the socket holder(G).

4. Install the light bulbs in accordance with the fixture’s specifications.

NOTE: DO NOT EXCEED THE SPECIFIED WATTAGE.

5. Attach the big ring(H) onto the glass shade(I),

Raise the

glass shade

assembly

to the

socket holder,

lock it securely with screw

(J)

until snug

6. Thread the two studs (A) into the pre-drilled holes in the Mounting

plate spaced the same distance apart as the holes in the canopy (B).

7. Attach the Mounting plate to the Junction Box with the two Junction

Box Screws as shown. The side of the Mounting plate marked "GND"

must face out.

8. While holding the column assembly towards the ceiling , connect the

electrical wires as Shown in Fig.2, making sure that all wire nuts are

secured. You may have to wrap the connections with electrical tape.

If your outlet has a ground wire (green or bare copper), connect the

fixture ground wire to it. Otherwise connect fixture’s ground wire

directly to the Mounting plate with the green screw provided. After

wires are connected, tuck them carefully inside the Junction Box.

9. Put canopy (B) on to the outlet box, aligning screws on mounting

plate with mounting holes in canopy and lock it securely with ball

nut (C).

Your installation is now complete Return power to the

junction box and test the fixture.

Fig.1

Fig.2

White or

HOUSE

Black

WIRES

(Hot)

Smooth

FIXTURE

WIRES

Black or

Ribbed

WIRES

FIXTURE

Bare Copper(Ground)

FIXTURE

WIRES

Copper

(Ground)

HOUSE

(Neutral)

WIRES

White

Bare

Green or

WIRES

HOUSE

Listed