Instruction Manual

BEFORE FIRST USE
IMPORTANT! Always place and operate the appliance on a flat, solid, clean, dry and
heat-resistant surface.
1. Unpack the appliance and check if all parts are there and undamaged. In case of
shipping damage or incomplete package, return the product.
2. Clean the inside and outside of the appliance with a damp cloth or sponge. Wipe dry
with a soft dry cloth.
WARNING! Do not immerse the appliance in water or any other liquid to clean.
3. Dry all components thoroughly before use.
4. Place the appliance on a flat, heat resistant stable surface and ensure a minimum of
10cm free space around the appliance and 50cm above. Do not operate your appliance
inside a cabinet or under a wall cabinet.
5. Plug the appliance into an electrical power outlet and switch on.
Note: Make sure the voltage indicated on the appliance matches the local voltage before
connecting the appliance to mains power.
6. Allow the appliance to heat up for approximately 5 minutes. Apply a thin coating of
cooking oil to the cooking plates and carefully rub it in with a paper towel. You only need
to condition the cooking plates when using the appliance for the first time.
7. After warm up, add your desired food and cook as specified in the recipe.
WARNING! The cooking plates will get very hot.
NOTE 1: During use, the green indicator light will switch on and off periodically,
this is normal and indicates that the elements are switching on and off to regulate
the preset cooking temperature.
NOTE 2 : On first use there may be a small amount of smoke and odour emitted
from the appliance. This is perfectly normal and will subside after few minutes of
use.