Instruction Manual

AFTER SALES SUPPORT
[e-mail] or 0800 100 858
7
• Attach the RH End by fitting the Connecting Bolts with the corresponding pre-drilled holes as shown
below.
• Lock the pieces together by turning the Cams ¼ - ½ of a turn in a clockwise direction.
• Attach the Modesty by fitting the Connecting Bolts with the corresponding pre-drilled holes as
shown below.
• Once again, lock the pieces together by turning the Cams ¼ - ½ of a turn in a clockwise direction.
STEP 5: Attach the RH End
Turn Cam ¼ - ½ of a turn
Turn Cam ¼ - ½ of a turn
STEP 6: Attach the Modesty
Turn Cams ¼ - ½ of a turn