Instruction Manual

AFTER SALES SUPPORT
[e-mail] or 0800 100 858
8
• Attach the LH End by fitting the Connecting Bolts with the corresponding pre-drilled holes as shown
below.
• Lock the pieces together by turning the Cams ¼ - ½ of a turn in a clockwise direction.
• Tap the four Nail on Glides into the bottom of the Ends as indicated below. Space them about
50mm in from the front and back edges.
STEP 7: Attach the LH End
Turn Cams ¼ - ½ of a turn
Turn Cams ¼ - ½ of a turn
STEP 8: Attach Nail on Glides
Nail on Glide