User's Guide

14
5.4 Access Point Mode
(Applied to Windows 8.1 or Windows 7)
Step 1 :
Click “Access Point”
option to enable
proprietary soft AP
configuration / status
page in drop down
menu of Mode(M).
Step 2 :
“General” tab to
show/set up soft AP
status / configuration
like connected wifi
clients info / set
wireless SSID and
security with “Config”
button is clicked or ip
address and internet
connection sharing via
wired connection. Click
“Apply” button after
the ip address is be set.
Step 2.1 :
“Config” is to set up
wireless SSID, available
channel and
authentication /
encryption keys
settings. Click
“OK”/”Cancel” to
save/abort settings