User's Guide

4
To use the WLAN 11ac USB Client Adapter with a computing device, the
WLAN and Bluetooth Combo Adapter must be equipped with a proper Interface.
All drivers and supporting software for the WLAN Adapter must be installed and
configured first.
Ask your system administrator for the following information, which
you may need to provide during driver installation :
 Your Wireless Client Name.
 Your Wireless SSID.
 Your computer’s unique client name and workgroup name. For your
network account, your user name and password.
 Your IP address, gateway address, and subnet mask if you’re not
using a DHCP client.
Any computer on a network is identified by a unique network address. There
are two methods to assign a network address to a computer on a TCP/IP
network :
 Static IP addressing.
 Dynamic IP addressing (DHCP Client).
In network with static IP addressing, the network administrator manually
assigns an IP address to each computer. Once a static IP address is assigned,
a computer uses the same IP address every time it reboots and logs on to the
network. You may manually change the IP address in the Network Properties
dialog box. Network using static IP address is easy to set up and do not
require additional network management software .
In network with dynamic IP addressing, a DHCP server in the network
dynamically assigns IP addresses to all clients every time they log on to the
network. Network using dynamic IP address requires setting up and running a
DHCP Server.