User's Manual

www.lm-technologies.com

LM822 User Manual

Step 9 :

Click OK to the pop up message. Select the new Ethernet interface created (en2,

en3 or similar) then press Apply. This enables the selected Ethernet interface and

the Wireless Network Utility detects the LM822. The MAC address of the LM822

and link status is updated on the Wireless Network Utility window.

Step 10 :

Check the Available Network section on the Wireless Network Utility and

connect to the wireless network.

Step 11 :

Once the network has connected, press Add to Profile to save the network and

it will connect automatically.