User manual

3) The LMP Keypad greatly reduces the power consumption automatically when it is in
idle mode (connected, but no keying). In fact, the power consumption in idle mode is
only about ¼ (about 0.65 mA) of the consumption of the keying mode (typing on the
LMP Keypad; about 3 mA). This feature greatly extends the battery life.
4) The LMP Keypad uses 2 pcs. AA size batteries. You can either use non-rechargeable or
rechargeable batteries.
Connecting with Apple™ wireless keyboard (A1314)
1) Connect the linkage bar to the LMP Keypad on its left side by simply sliding it into
the opening. It will nicely form a Keypad unit ready to be linked to the Apple™
wireless keyboard.
2) Connect the Keypad unit to your Apple™ wireless keyboard (A1314) by sliding the
right side into the LMP Keypad unit as shown in figure shown below. You now have a
full size Bluetooth wireless keyboard ready for use!
3) You can turn on/off the Apple™ wireless keyboard with the power on bar of the LMP
Keypad situated on the right side and upper right corner of the LMP Keypad. To turn
on the Apple™ keyboard, press the power on bar of the LMP Keypad for 1 second. To
turn off the Apple™ wireless keyboard, press the power on bar for about 2 ~ 3
seconds.