Installation Guide

+1 850 296 2377 Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST support@ihomeangel.com
www.ihomeangel.com Page: - 2 - / 3
PARTS TYPE & QTY INCLUDING:
(A) Mounting plate (1)
(B) Green ground screw (1)
(E) Canopy (1)
(F) Knob nut (3)
(G) Fixture (1)
ACCESSORIES & QTY ENCLOSED:
(C) Plastic Wire Connector (3)
(D) Mounting screw (2)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and accessories are
included as shown in the above illustration .
2.
Turn off power
Before you start to make installation, NEVER attempt any work without shutting off the
electricity until the work is done. A). Go to the main fuse, or circuit breaker, box in your home.
Place the main power switch in the “OFF” position. B). Place the wall switch in the
“OFF”position.
3. Unscrew knob nut(F) from canopy (E) then gently
remove the mounting plate(A)
4. Carefully pass wires over the mounting plate (A)
Secure mounting plate (A) to outlet box with
outlet box screwsD.