Installation Guide

[phone] Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST [e-mail]
www.ihomeangel.com Page: - 2 - / 4
TOOLS REQUIRED (NOT INCLUDED):
Before doing assembly and installation please prepare the needed tools as below picture
PARTS TYPE & QTY INCLUDING:
(B) Mounting plate assembly (1)
(C)Green ground screw (1)
(E) Handle assembly (6)
(F) Socket (1)
(G) Ball knob (2)
(H) Center rod (1)
(I) Glass shade (1)
(J) Metal shade (1)
(K) Finial (1)
ACCESSORIES & QTY ENCLOSED:
(A) Plastic wire connector (3)
(D) Mounting screw (2)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and
accessories are included as shown in the above illustration
2. Unscrew the ball knobs ( G) from the fixture then carefully remove
the mounting plate assembly (B) from the fixture
3. Turn off power
Before you start, NEVER attempt any work without shutting off the electricity until the work is done. A). Go to the
main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF” position. B). Place the
wall switch in the “OFF” position.