Installation Guide

+1 850 296 2377 Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST support@ihomeangel.com
www.ihomeangel.com Page: - 2 - / 4
TOOLS REQUIRED (NOT INCLUDED):
Before doing assembly and installation please prepare the needed tools as below picture
PARTS TYPE & QTY INCLUDING:
(A) Round mounting plate assembly (1)
(B) Green ground screw (1)
(E) Canopy (1)
(F) Ball knob (2)
(G) Chain (1)
(H) Lid (1)
( I ) Jar (1)
ACCESSORIES & QTY ENCLOSED:
(C)Plastic wire connector (3)
(D) Mounting screw (2)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the above
illustration
2. Turn off power
Before you start to make installation, NEVER attempt any work without shutting off the electricity until the
work is done. A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in
the “OFF” position. B). Place the wall switch in the “OFF” position.
3. Unscrew the jar (I) from lids (H).
If the jar packed separately in a box, skip this step and proceed to step 4