Instructions / Assembly
Homeangel support@ihomeangel.com
www.ihomeangel.com Page: - 5 - / 5
7) Install bulb (Not included. Please do not exceed the maximum capacity recommended on the
socket.)
Adjust the fixture to desired direction through unscrewing the stud (G). Once the desired direction
achieved, tighten the stud (G).
4. Check everything is already installed properly, then you could turn on the light. Enjoy
CLEANING
To clean, wipe fixture with a soft cloth. Do not use abrasive materials such as scouring pads or powders, steel
wool or abrasive paper.
ORDERING PARTS
Keep this sheet for future reference, and in case you need to order replacement parts. All parts for this fixture
can be ordered from place of purchase. Be sure to use exact wording from illustration when ordering parts.