Instructions / Assembly

Homeangel [e-mail]
www.ihomeangel.com Page: - 2 - / 5
TOOLS REQUIRED (NOT INCLUDED):
Before doing assembly and installation please prepare the needed tools as below picture
PARTS TYPE & QTY INCLUDING:
(A) Mounting plate (1)
(B) Green ground screw (1)
(E) Back plate (1)
(F) Ball nut (2)
(G) Stud (3)
(H) Joint (3)
(I) Arm (2)
(J) Socket (1)
(K) Decorative ring (1)
(L) Shade (1)
(M) Socket ring (1)
ACCESSORIES & QTY ENCLOSED:
(C) Mounting screw (2)
(D)Plastic wire connector (3)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and
accessories are included as shown in the above illustration
2. Turn off power
Before you start to make installation, NEVER attempt any work without shutting off the electricity until the work is done.
A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF” position. B). Place
the wall switch in the“OFF” position