Instructions / Assembly

Homeangel [e-mail]
www.ihomeangel.com Page: - 3 - / 5
3. Make installation
1) Unscrew the knob nuts ( F) from backplate (E) then carefully remove
the mounting plate (A) from backplate (E)
2) Carefully and gently pull the wires and fiberglass sleeve from
another end of arm(I) ,meanwhile push the socket to get close to the joint.
then lay wires in the cave of joint(H).And continue the step till the joints
are combined together,then secure with the stud. Do the same to the middle
joints and base joints to finish the arms assembled
3) Unscrew the studs from the decorative ring(K),then position
decorative ring(K)and the metal shade (L) onto the socket (J),
secure with the socket ring (M) and the studs.