Installation Guide

ASSEMBLY & INSTALLATION
INSTRUCTIONS:
www.ihomeangel.com
Page: - 2 - / 4
TOOLS REQUIRED (NOT INCLUDED):
Before doing assembly and installation please prepare the needed tools as below picture
PARTS TYPE & QTY INCLUDING:
(B) Round mounting plate (1)
(C) Green ground screw (1)
(E) Canopy (1)
(F) Loop (4)
(G) Quick link (2)
(H) Ball knob (2)
( I ) Tube (8)
(J) Fixture (1)
ACCESSORIES & QTY ENCLOSED:
(A)Plastic wire connector (3)
(D) Mounting screw (2)
1. Carefully remove the fixture from the carton and check that all parts and
accessories are included as shown in the above illustration
2.
Turn off power
Before you start to make installation, NEVER attempt any work without shutting off the electricity
until the work is done. A). Go to the main fuse, or circuit breaker, box in your home. Place the main
power switch in the “OFF” position. B). Place the wall switch in the “OFF” position.
[phone] Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST [e-mail]