Installation Guide

www.ihomeangel.com
Page: - 3 - / 4
3. According your desired hanging length to select and use the tubes (I)
then pass the wires through the tubes(I) to the top of loop .Gently pull
wires and thread the tubes (I)onto the fixture (J) till tight
4. Unscrew the ball knobs (H)from the canopy (E) then remove the
mounting plate (B)
Attach a quick link (G)to loops(F) to connect the cannopy (E) and tube(I)
Gently and carefully pass the wires through the loop(F) to the top of
cannopy (E)
5. Attach the mounting plate(B) to outlet box with the mounting screws(D)
6. Make wire connections
Connect wires as below wires connecting shown. TAKE NOTE OF YOUR COLOR OF FIXTURE ,NEVER CONNECT
WIRES TO GROUND WIRES
Connect ground wire according to below chart Connect wires according to below chart
[phone] Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST [e-mail]