Installation Guide

www.ihomeangel.com Page: - 2 - / 4
TOOLS REQUIRED (NOT INCLUDED):
Before doing assembly and installation please prepare the needed tools as below picture
PARTS TYPE & QTY INCLUDING:
(B) Mounting plate assembly (1)
(C) Green ground screw (1)
(E) Canopy (1)
(F) Arm (2)
(G) Bracket (4)
(H) Metal shade (4)
(I) Knob nut (2)
ACCESSORIES & QTY ENCLOSED:
(A) Plastic Wire Connectors (3)
(D) Mounting screw (2)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the
above illustration .
2. Turn off power
Before you start to make installation, NEVER attempt any work without shutting off the electricity until the work
is done. A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF”
position. B). Place the wall switch in the “OFF”position.
3. Carefully adjust the arms (F) into position.
+1
850 296 2377 Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST
[e-mail]