Product Info
Table Of Contents
- 1. Introduction
- 2. APPLICABLE MODULE
- 3. Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator
- 4. Compliant/Allowable Tx Power Settings
- 5. Allowable Antennas to use with the Radio Module
- 6. Antenna Placement and RF Safety
- 7. Simultaneous Transmission with other Integrated or Plug-in Radios
- 8. Module May Not Be Installed by End Users
- 9. REQUIRED LABELING ON THE OUTSIDE OF THE HoST
- 10. REQUIRED LABELING ON THE MODULE
- 11. REQUIRED REGULATORY WORDING FOR End USER MANUAL / INSTALLATION MANUAL
- 11.1 FCC Requirements for End User Manual / Installation Manual
- FEDERAL COMMUNICATIONS INTERFERENCE STATEMENT
- FCC RF Exposure Requirements:
- 11.2 Industry Canada Requirements for End User Manual / Installation Manual
- Industry Canada Statements
- Radiation Exposure Statement
- Déclaration d'exposition aux radiations
- 12. OEM Integrator Checklist
Open-Q 835 µSOM Modular Certification TechNote77 OEM Integrator Guide
Rev. 1.1
1
Copyright Intrinsyc Technologies Corporation
Identification
Document Title Open-Q 835 µSOM Modular Certification TechNote77 OEM
Integrator Guide
Document Number ICS-01RND1265-TN-077
Version 1.1
Date September 19, 2019
History
REVISION DATE DESCRIPTION PAGES
0.1 Sept 6, 2019 Original Document All
0.2 Sept 9, 2019
Incorporated changes after initial document review:
Changed references and name of document from
Open-Q
TM
835uSOM to Open-Q
TM
835μSOM.
All
1.0 Sept 17, 2019
Corrected minor typos on and changed revision to
1.0.
9, 13
1.1 Sept 19, 2019 Removed
TM
Superscript in Model and filename All
Note: The Intrinsyc Open-Q 835 µSOM radio module (the “Module”) is certified for
compliance for use in the USA and Canada only. For use in other countries, certificates of
compliance must be obtained for that country or region before the module can be sold,
operated or incorporated into products. In addition, any deviation from the settings,
methods, conditions and restrictions for integration of the Module into a host system, as
defined in this document, could be a violation of applicable national law and may be
punishable as such, and in such event, the products into which the Module is incorporated
may not be lawfully distributed or sold in such countries. Intrinsyc assumes no responsibility
for any such liability or loss related to installation or operation of the Module.