User's Manual

72 Revision 2 GM550 v1043 FCC-IC.doc
• Box water tightness: if the transmitter box has been removed it must be correctly resealed
with RTV non-corrosive silicone.
• Antenna: small scratches on the antenna will not affect radio communications. A heavy
bending of the antenna or bare sections on the wire may reduce the radio efficiency.
• Transmitter box hex bolts: hex head bolts on the transmitter box are there to protect the
antenna and to hold the transmitter box on the load cell link. If one or both hex nuts are
scratched, it will not affect the load cell readings on operation. If the bolt head is bent or
sheared verify the transmitter box fits tightly to the load cell link before contacting LSI for
replacement bolts.