Operation Manual

27
1. Pull out AC plug from the socket.
2. Pull out DC plug from the socket.
3. Turn the switch of the fuel tank to “OFF” in the direction shown in the figure.
4. Turn the switch of the engine to “OFF” in the direction shown in the figure.
5. Turn the knob on the top of the fuel tank cap to “CLOSE” in the direction shown
in the figure.
6. OPERATION
WARNING
In order to avoid electric shock caused by failure of the device, the generator
should be grounded before operation. The diameter of the grounding should be no
less than 1.5 mm
2
.
APPLICATION OF AC POWER SUPPLY
1. Insert the electrical appliance plug in the AC output socket.
2. Press AC current protector downward to “ON”.
APPLICATION OF DC POWER SUPPLY
3. At first connect the cord for charging to the output socket. Then connect to the
storage battery.
Note: the DC terminal can just be used to recharging of 12V>20Ah auto storage
battery.
4. Turn on the DC overcurrent protector in the direction of the
arrow.