Operation Manual

9. LONG TIME STORAGE

If store the generating set for long periods, make the following preparations

1 Operate the engine for about 3 minutes and then

stop.

2 Stop the engine. Drain the engine oil while the

engine is still warm and fill with fresh oil.

3 Remove the screw plug on the cylinder head cover

and refill 2cc engine oil, then put the plug in place.

4 Turn the engine 2-3 seconds with the

decompression lever set at the non-compression

position, and the starting key at the "START" position.( (Do not start the

engine.)

5 Wipe off the oil and dirt from the engine and store in a dry place.