User Manual

• 2
Loadstar Sensors, Inc. • www.loadstarsensors.com
11. Click on Log View -> to switch to the log window.
12. In this view,
o Check the Log Sensor Readings to File to enable logging. The logging can either be at
predetermined intervals or on demand.
o Click on the Log Interval to a select a log interval time. (Log at 1 sec, 10 sec, 1 min … etc)
and then click Start to start logging.
o If you have selected the ‘On Demand’ option, after you click Start, click on the Log Now
button whenever you want to log a single reading of the scale.
o Click Stop to stop reading the scale and to stop logging.
o Click on <- CG View and Log View -> buttons on the toolbar to switch between the two
views.
Select Log Interval.
Select Log File.
Click here to log a
single reading
Check this box to
enable logging.