Water Heater User Manual

1 Service

Burners Screen:

This screen provides the status of the combustion air blowers

and flame signals. Items that can be viewed on the Burners

Screen are as follows:

• Blower Power Level Indicator - Two (2) blowers are

depicted on the display. The top blower corresponds with

Heat Exchanger 1 or Top heat exchanger. The lower

blower corresponds with Heat Exchanger 2 or Bottom

heat exchanger. Beside each blower is a power level

indicator. The level will increase and decrease indicating

the approximate power level of the blower. The display

box underneath each indicator level will display the firing

rate of each control module.

• RPM’s - Each blower will display the rpm that the

control module is requiring of the blower.

• Flame Signal - The flame signal for each control module

will be displayed in dc microamps.

Time - The time is displayed in the upper right-hand corner of

the display. It is displayed in a 24 hour format. Reference the

night setback parameters on page 21 for information regarding

adjusting the date and time.

Status button - Pressing this button displays the Status Screen.

this screen shows the current status of the Armor X2 water

heater. Reference page 12 for more information regarding this

screen.

Main button - Pressing this button displays the Main Screen.

From this screen, navigation to eight (8) other screens is

possible. Reference the Main Screen on page 16 for more

information regarding this screen.

Service Manual