User Guide

11
Display panel parameter access
Table 1C This is a typical example of accessing a parameter, shown for parameter DHW Settings, TANK MIN Setpt
1 Service (continued)
BUTTON
SCREEN
STATUS
OPERATION DISPLAY
This example shows how to access parameter Temperature Settings. The first display shown is at the beginning
of the menu listings, after entering the installer access code.
Rotate the NAVIGATION dial counterclockwise until
the arrow (>) is next to DHW SETTINGS.
Press the NAVIGATION dial one time.
Rotate the NAVIGATION dial counterclockwise until
the arrow (>) is next to TANK MIN SETPT.
Press the NAVIGATION dial one time. The TANK
MIN SETPT setting will begin to flash.
Rotate the NAVIGATION dial to the desired
temperature.
[SAVE] Press the RIGHT SELECT soft key [SAVE] one time.
[EXIT]
Press the LEFT SELECT soft key [EXIT] if more
changes are to be made.
[HOME]
When finished making changes, press the LEFT
SELECT soft key [HOME].
>
>
Service Manual