Manual

Installation Instructions for Model 2013 Console Safe

1. First thing before you begin installation of your new console safe, it is a good idea if you have a

ombination lock, to set your personal combination. Those instructions are on a separate sheet.

2. Empty the contents of your console and remove the factory pad to expose the four bolts that

hold down the console.

3. Remove the right rear and left front bolts.

4. Use a flat screw driver or similar tool to remove the power port with the surr

ounding bezel. It

will be replac

ed later.

5. Set the console safe inside the console and use the included longer bolts to hold it down.

6. Place the included neoprene pad in the bottom of safe.

7. Replace the power port and you are done.

8. ENJOY