DL 6ef1dc46475ca2465c4d88c107a9

1. For any combination style lock, it is a good idea to set the combination before installing the
safe. We recommend that the combination be set with the DOOR OPEN in order to test the
lock combination effectively without locking yourself out.
2. Clear out the contents of the center console for now, including the factory mat at the bottom of
the console.
3. Remove the 2 BOLTS that hold the console compartment to the seat frame.
4. Remove the neoprene padding from the inside of the safe for now.
5. Set the safe into the center console.
a. The slots at the bottom of the safe should line up with the slots from the removed bolts
in Step 3.
6. Secure the safe to the console compartment using the 2 10mm BOLTS provided by
LOCK’ER DOWN.
7. Tighten the bolts, DO NOT OVER TIGHTEN, THIS COULD DAMAGE THE CONSOLE.
8. Re-insert the padding that was removed from the safe before installation.
9. Enjoy your purchase!
Tools Needed:
• IMPACT DRILL or SOCKET WRENCH
• 10mm Socket bit
Contents Included: 2 10mm Bolts.
Security Products
INSTALLATION INSTRUCTIONS
LD2049/LD2049EX
[2007-2021 Toyota Tundra with Split Bench Seat]