DL e3b5addad04b46713ae5713cafe8

1. For any combination style lock, it is a good idea to set the combination before installing the
safe. We recommend that the combination be set with the DOOR OPEN in order to test the
lock combination effectively without locking yourself out.
2. Clear out the contents of the center console for now, including the factory mat at the bottom of
the console.
3. Use the T30 Torque bit along with your fastening device to remove the 2 bolts at the bottom
and toward the front of the console. Make sure to keep the 2 removed bolts.
4. Remove the padding from the bottom of the inside of the safe.
5. Set the safe into the center console.
a. The front slots at the bottom of the safe should LINE UP with the factory holes in the
console.
6. Using your 10mm fastening device, insert the LOCK’ER DOWN PROVIDED 10MM BOLTS
into the factory holes at the bottom of the safe (these holes should line up with the factory
screw holes at the bottom of the compartment)
7. Tighten the bolts, DO NOT OVER TIGHTEN, THIS COULD DAMAGE THE CONSOLE.
8. Re-insert the padding that was removed from the safe before installation.
9. Enjoy your purchase!
Tools Needed:
• IMPACT DRILL or SOCKET WRENCH
• T30 Torque Bit
• 10mm Socket bit
Contents Included: 2 10mm Bolts.
Security Products
INSTALLATION INSTRUCTIONS
LD6080/LD6080EX
[2018 to 2021 Volkswagen Atlas]