Full Product Manual

7SECTION 2.7
2.7 Low Battery
When the battery is in seriously low condition, Lockly™ will make continuous beeping
sounds in addition to the flashing low battery icon on the touch screen. You should
replace batteries immediately to avoid your smart lock from shutting down.
Dead Battery
Condition Indicator Solution
Low Battery
.
Replace batteries immediately
to avoid battery failure. Lockly
™ Secure can still operate up
to 300 cycles in low battery
condition.
Battery Icon on the display
keypad will light up to indicate
low battery.
When there is no display and
sounds; and screen is non-func-
tional.
Replace batteries immediately.
Supplied physical backup keys
can be used to unlock the
door. Alternatively, use a 9V
battery as shown below to
temporarily activate the lock.
9V Battery
-
+
Your Lockly™ will automatically detect the
battery polarity, so just hold
and place your 9V
battery leads in place
against bottom of the
Lockly™ to
temporarily activate the screen to
enter your Access Code. Be sure to hold the
9V
battery against the contact points located at
the bottom of the lock until you have success-
fully unlocked your
door with your Access
Code. Once
unlocked, batteries should be
replaced
immediately.