Full Product Manual

SECTION 3.1 9
3.1 Configuring Access
The Default Access Code is
NOTICE
1 2 3 4 5 6
Your new Lockly™ Access Code can be any combination of 6 to 8 digits.
Once a new Access Code is entered, the Default Access Code of 123456 would be deleted.
A Maximum of 8 sets of Access Codes can be stored for use at any given time. To add more
than 8 sets of Access Codes, you must delete an existing Access Code before adding a new code.
How to Use the Keypad
There are a total of five (5) buttons on the keypad as shown
in the example image to the left. The numbers in each
button may differ than what is shown on your device than
what is displayed here.
To enter your required digit, just simply press the circle
where your number is shown. You do not need to press the
actual number as anywhere within the circle will suffice.
The button on the bottom is the OK button. You will be press-
ing this button when you are done entering your Access
Code.
OK Button
We recommend pairing your lock to your smart phone to manage your
access codes. Section 3.1 - 3.9 refers to locks not paired with a smart
phone. Once paired with a smart phone, the Program button will be
disabled.