Full Product Manual

13SECTION 3.4
3.4 Deleting an Access Code
While in Programming
Mode, select “2DE” to
delete an Access Code. If
you are not in Programming
Mode, please see Section
3.2 to enter Programming
Mode.
After pressing “2DE” press
“Pd” to delete an Access
Code.
OK Button
Example Only
Active Access Codes will then be displayed on the screen
in sequence from left to right, top to bottom. In the
example shown on the left, the Access Code displayed is
1 3 5 7 9 0 .
Rotate through different Access Codes shown by touch-
ing any number on the screen. If you find the Access
Code you want to delete, simply hold the OK button for 2
seconds. (Continue on next page)