Full Product Manual

4.1 Locking/Unlocking with Access Codes

OK Button

Slide your hand across the screen to activate the

keypad.

Enter your 6 to 8 digit Access Code followed by

the OK button. Press OK anytime to reset if you

entered the wrong digit.

If the Access Code entered is correct, the door

will unlock. If the Access Code entered is incorrect,

Lockly™ will beep twice.

Three consecutive wrong attempts will put Lockly™ in “Safe Mode”.

(See Section 4.5)

Lock your Lockly™ by pressing the OK Button or by brushing your hand across the screen

anytime when the door is closed. The smart lock will also auto-lock after unlocking based on

your set auto-lock settings.

You may toggle between two types of keypad

displays to enter your Access Code. The fixed

digit version and the PIN Genie™ version (Recom-

mended). Press and hold the OK Button for 3

seconds to toggle back and forth between the two

keypads.

(Sample display shown only)

Hold OK (3 sec)

PIN Genie™

Fixed Digit

Lockly™ Smart Lock can be unlocked using multiple ways - via your stored Access Code,

registered

fingerprint, smartphone with Bluetooth, the physical key supplied with your lock,

or voice (Secure Pro only or Secure Plus with Secure Link Wi-Fi Hub installed)

SECTION 4.1