Use and Care Manual

2.7 Low Battery
SECTION 2.7
When the battery is in seriously low condition, Lockly™ will make continuous beeping
sounds in addition to the flashing low battery icon on the touch screen. You should replace
batteries immediately to avoid your smart lock from shutting down.
Dead Battery
Condition Indicator Solution
Low Battery
.
Battery Icon on the display keypad
will light up to indicate low battery.
Replace batteries immediately to
avoid battery failure. Lockly™
Secure can still operate up to 300
cycles in low battery condition.
When there is no display and sounds;
and screen is non-functional.
Replace batteries immediately.
Supplied physical backup keys
can be used to unlock the door.
Alternatively, use a 9V battery as
shown below to temporarily
activate the lock.
9V Battery
-
+
Your Lockly™ will automatically detect
battery polarity. So hold your 9V
battery
lead in place against bottom of
the
Lockly™ to
temporarily activate t he
screen to enter your
Access Code . Be
sure to hold the 9V battery against
the
contact points located at the bottom
of
the lock until you have successfully
unlocked your door with your Access
Code . Once unlocked, batteries should
be replaced immediately.
7