Use and Care Manual

3.3 Adding an Access Code

SECTION 3.3

While in Programming Mode,

select “1AD” to add an Access

Code. If you are not in Pro-

gramming Mode, please see

Section 3.2 to enter Program-

ming Mode.

After pressing “1AD” press

“Pd” to add an Access Code.

Enter your new 6 - 8 digit Access Code and press

when you are finished. You will then re-enter the code

to confirm your new Access Code.

Remember, just touch the digit you need within the circle

around each 3 numbers. There is no need to touch the

exact location of the number. For example, based on the

example image to the left, if you need “1”, you can touch the

upper left button or the lower right button. For “6”, you

would touch the upper right button.