Use and Care Manual

3.4 Deleting an Access Code

SECTION 3.4

While in Programming Mode,

select “2DE” to delete an

Access Code. If you are not in

Programming Mode, please

see Section 3.2 to enter Pro-

gramming Mode.

After pressing “2DE” press

“Pd” to delete an Access

Code.

OK Button

Example Only

Active Access Codes will then be displayed on the screen

in sequence from left to right, top to bottom. In the exam-

ple shown on the left, the Access Code displayed is

1 3 5 7 9 0 .

Rotate through different Access Codes shown by touching

any number on the screen. If you find the Access Code

you want to delete, simply hold the OK button for 3 seconds.

(Continue on next page)