Use and Care Manual

4.1 Locking/Unlocking Lockly™ with Access Codes

SECTION 4.1

Lockly™ Secure can be unlocked using 1 of 4 ways - via your stored Access Code, registered

fingerprint (Secure Plus / Pro only), smartphone with Bluetooth, or with the physical key

supplied with your lock.

OK Button

Three consecutive wrong attempts will put Lockly™ in “Safe Mode”. (See Section 4.5)

Lock your Lockly™ Secure by pressing the OK Button anytime when the door is closed.

Lockly™ Secure will also auto-lock after five (5) seconds after unlocking and opening.

Slide your hand across the screen to activate the

keypad.

Enter your 6 to 8 digit Access Code followed by

the OK button. Press OK anytime to reset if you

entered the wrong digit.

If the Access Code entered is correct, the door will

unlock. If the Access Code entered is incorrect,

Lockly™ will beep twice.

Hold OK Button (3 sec)

You may toggle between two types of keypad displays to

enter your Access Code. The fixed digit version and

the PIN Genie

version (Recommended). Press and

hold the OK Button for 3 seconds to toggle back and

forth between the two keypads.

PIN Genie

Fixed Digit