Use and Care Manual

5.1 Offline Access Code (OAC)
SECTION 5.1
The Offline Access Code (OAC) is a unique feature of Lockly Secure Deadbolt Edition. It
allows you to grant access to guests remotely without guests needing to download the app.
To use the OAC feature, make sure you download the Lockly™ app for iOS or Android first,
and sync your smart lock to your mobile device.
From there, you can then issue an Offline Access Code within the app.
Go to “Access Management” and choose “Add a New Offline Access Code (OAC)” and
follow on screen instructions to generate your Offline Access Code.
Understanding Offline Access Code (OAC)
Each lock can issue up to 50 OAC before you have to reset and reissue another set of 50
codes. Your app will generate some to follow directions automatically for your guests to use.
OAC are issued to the guest by asking them to enter a 6 digit number, followed by a 4 digit
number, followed again by a 4 digit number, entering in between every set of numbers.
See the following example.
234567+0987 0987
Guests’ Access Codes OAC Configuration Number
Sample OAC
Once a sequence like the one above is entered, it automatically activates an OAC to be used
for a specific duration of time. In the example above, the Guest’s Access Code will be
234567 to unlock the door. 0987 is the Configuration Number that sets the total duration of the
Access Code, whether it’s a 1 time use code, 1 hour duration code, or 30 days.
29