User's Manual

4.6 Safe Mode - Overview
5 minutes. A 15 second video will be recorded once the lock entered into Safe
Mode. When in Safe Mode, the lock status icon will start to flash.
for
3 seconds.
Once the screen is activated, enter the correct Access Code carefully twice, pressing
after every time.
If you enter the wrong code, the keypad will then be disabled for 10 minutes.
Countdown Prompt
(Displayed in Minutes)
Will start with 10 and
countdown until 0.
You will see a “10” on the screen, notifying the number of minutes that the keypad is
disabled for. After 10 minutes, you may attempt to enter the correct Access Code to
unlock the door. After the second incorrect attempt to unlock the lock with the wrong
Access Code, LOCKLY will disable the keypad for 20 minutes, displaying a “20” on the
screen. After the third wrong attempt to unlock the door with the correct Access Code,
the screen will be disabled for 30 minutes. (Example A and Example B above).
Note: In order to conserve power, the countdown prompt will only be displayed for 3
seconds. You can reactivate the screen by sliding your hand across the screen.
Example A Example B
SECTION 4.6
20