User's Manual

Like other digital electronic products water can trigger to activate the touchscreen and fingerprint

sensor which may cause the batteries to drain. To protect the lock and extend battery life, you can

setup your LOCKLY to enter Rain Mode to shut off keypad and fingerprint reader whenever rain or

water is detected.

Activate this feature on the LOCKLY app. While you are within the Bluetooth range or remotely con-

nected thru Wi-Fi hub (Secure Link), go to Settings > Rain Mode and toggle the button to

turn ON.

If you have not yet connected your device to LOCKLY App,

follow below steps to activate the rain mode feature:

RAIN MODE ON

1. Long press to enter fixed digit keypad.

2. access code +234+ .

3. You will hear a short beep and Bluetooth

indicator flashes green once Rain Mode is ON.

RAIN MODE OFF

1. Long press to enter fixed digit keypad.

2. Enter access code +890+ .

3. You will hear a long beep and Bluetooth

indicator flashes green once Rain Mode is OFF.

example: 135790 + 234 +

example: 135790 + 890 +

4.7 Rain Mode

SECTION 4.7