User's Manual

8 SECTION 3.1
3.1 Configuring Access
We recommend pairing your lock to your smart phone to
manage your access codes. Section 3.1 - 3.11 refers to
locks NOT paired with a smart phone. Once paired with a
smart phone, the Program button will be disabled.
How to Use the Keypad
There are a total of five (5) buttons on the keypad
as shown in the example image to the left. The
numbers in each button may differ than what is
shown on your device than what is displayed here.
To enter your required digit, just simply press the
circle where your number is shown. You do not
need to press the actual number as anywhere
within the circle will suffice.
The button on the bottom is the OK button. You
will be pressing this button when you are done
entering your Access Code.
Your new Lockly Guard Access Code can be any combination of 6 to 8 digits.
Once a
new Access Code is entered, the Default Access Code of 123456 would be
deleted.
A maximum of 16 sets of Access Codes can be stored for use at any given time.
To add more than 16 sets of Access Codes, you must delete an existing Access
Code before dding a new code. If you're not using the APP, you can store up to
18 sets of Access Code.
OK Button
The Default Access Code is 1 2 3 4 5 6
NOTICE