User's Manual

SECTION 3.4 11
Once you have selected the Access Code you want to delete,
Lockly Guard will ask you to
confirm deletion by showing you the
Access
Code you are deleting, in this example, 1 3 5 7 9 0.
Press to delete, or to cancel.
3.4 Deleting an Access Code
While in Programming Mode, select “2DE” to delete an Access Code. If you are
not in Programming Mode, please see Section 3.2 to enter Programming Mode.
After pressing “2DE” press “Pd” to
delete an Access Code.
Active Access Codes will then be
displayed on the screen in sequence
from left t
o right, top to bottom.
In the example shown on the right,
the Access Code displayed is
1 3 5 7 9 0 .
Rotate through different Access
Codes shown by touching any
number on the screen. If you find
the Access Code you want to
delete, simply hold the OK button
for 3 seconds.
Example Only
OK Button