User's Manual

SECTION 3.6 13
3.6 Adding a Fingerprint
We are using an advanced biometric sensor, providing the most secure fingerprint
authentication. For security reasons,
Lockly Guard will only accept fingerprint
patterns that consist of cross intersection points. Patterns with no cross intersection
points will not be acceptable.
Please check your fingers before registration to make sure the finger you want to
register will be acceptable by our system. Otherwise, use an alternative finger to
ensure successful registration.
The following examples show which types of fingerprint patterns will be acceptable.
It is highly recommended to enroll at least one finger from each hand in case the
hand you are using is unavailable, such as, in instances like if you are holding
items in that hand or have sustained an injury.
Your Lockly Guard can register up to ninety-nine (99) fingerprints. Please read the
following sections if you want to add or delete fingerprints. We recommend using
your app to
add fingerprints, however, the following section can show you without
using the app.
Fingerprint Pattern with
Cross Intersection Lines
Concentric or Parallel Pattern
with no Cross Intersection Lines
Fingerprint with Scars
or Worn Out Ridges
OK Not OK Not OK