User's Manual

SECTION 3.9 17
3.9 Deleting Stored Fingerprints*
While in Programming Mode, select “2DE” to delete a Fingerprint. If you are not
in Programming Mode, please see Section 3.2 to enter Programming Mode.
After pressing “2DE” to delete, press “FP” to delete a fingerprint.
Your registered fingerprint numbers
will be displayed on the screen.
Tap number to rotate to the next
registered fingerprint. When you
have found the fingerprint ID you
want to delete, press and hold
the OK button for 3 seconds to
delete. (Example shown - “02”)
Fingerprint
ID Number
OK Button
You will then see a confirmation page displaying and with the fingerprint
number you are deleting displayed. Select Y to delete or N to cancel.
Alternatively, while on Programming Mode, select 2DE, then press FP and place
the registered fingerprint you want to delete on the fingerprint sensor. Your smart
lock will identify the fingerprint and jump to confirmation page displaying Y and N.
Select Y to delete or N to cancel.
*Only works when lock is not paired with a smart phone device. If paired to a
device please delete your fingerprints from the administrative device paired
to your lock.