User's Manual

SECTION 3.11 ~ 3.12 19
3.12 Adding Lockly Secure Link
Lockly Secure Link adds live status monitoring control capabilities to your Lockly
Guard Smart Lock.
To set up the Lockly Guard smart lock with Secure Link Wi-Fi Hub and Door
Sensor, launch the LocklyPro App on your iOS or Android device. From the main
menu dropdown located on the upper left of the screen, select “Add a New
Device” then select “Secure Link Wi-Fi Hub”. Follow the in-app instructions to set
up your Secure Link.
3.11 Deleting RFID Card
While in Programming Mode, select “2DE” to delete an RFID card. If you are not in
Programming Mode,
please see Section 3.2 to enter Programming Mode.
After pressing “2DE” press “Id” to add an RFID card.
OK Button
Fingerprint
ID Number
Your registered RFID card will be displayed
on the screen. Tap the screen to show
the next registered RFID. When you have
found the RFID card you want to delete,
press and hold the OK button for
3 seconds to delete.
You will then see a confirmation page
displaying Y and N with RFID card number
you are deleting displayed . Select Y to
delete or N to cancel.