User's Manual

20 SECTION 4.1
4.1 Unlocking with Access Codes
Lockly Guard Smart Lock can be unlocked using multiple ways - via your stored
Access Code, registered fingerprint, smartphone with Bluetooth, or the physical
key supplied with your lock.
Slide your hand across the screen to
activate the keypad.
Enter your 6 to 8 digit Access Code
followed by the . Press OK anytime
to reset if you entered the wrong
digit.
If the Access Code entered is correct,
the door will unlock. If the Access Code
entered is incorrect,
Lockly Guard will
beep twice.
OK Button
Lock your Lockly Guard by pressing the OK Button anytime when the door is closed.
Lockly Guard will also auto-lock after five (5) seconds after unlocking and opening.
You may toggle between two types of
keypad displays to enter your Access
Code. The fixed digit version and the PIN
Genie version (Recommended). Press
and hold the OK Button for 3 seconds to
toggle back and forth between the two
keypads.
PIN Genie
Fixed Digit
Hold OK Button (3 sec)
Three consecutive wrong attempts will put Lockly Guard in “Safe
Mode”. (See Section 4.6)